AREDN Build Changelog
Full Changelog
Merged pull requests:
- Fixed the consistency between “archive” and “realtime” SNR data #403 (mcleanra)
- Update .gitnignore to ignore more build artifacts #402 (BKasin)
- bugfix: ubnt lbe-m5 does not identify boardid #401 (ae6xe)
- Minor UI/output updates #399 (BKasin)
- aredn: Set default channel and width #396 (ae6xe)
- aredn: add definition for Mikrotik LHG 5HPnD #395 (ae6xe)
- bugfix: add luasocket feed to make luasocket package available #391 (dman776)
- feature: added localhosts info to api #390 (mcleanra)
- feature: add OLSR current neighbor info to API #389 (dman776)
- aredn: reset branch to develop #388 (ae6xe)
- feature: added chart endpoint to the /api #386 (mcleanra)
- feature: added a wifi scan endpoint to the /api #379 (mcleanra)
Full Changelog
Merged pull requests:
- aredn: Prepare 3.19.3.0 release #384 (ae6xe)
- Revert “aredn: enable ath9k auto distance capability (#367)” #383 (ae6xe)
- feature: update list of supported devices in prep for 3.19.3.0 release #382 (dman776)
- readme: updated with hAP AC Lite port info #381 (dman776)
- aredn: add definition for Rocket M5 TI GPS #380 (ae6xe)
- Add Arch build instructions to README #377 (BKasin)
- bugfix: delay start up of snmpd until later in the boot process. #375 (r1de)
- feature: standardize browser page title on the node status page #372 (dman776)
- bugfix: correct spelling error #370 (ae6xe)
- aredn: enable ath9k auto distance capability #367 (ae6xe)
- Adding support for the TP-Link WBS210 version 1. #361 (patrickdickey52761)
- aredn: add definition for nanobridge M2 13 #359 (ae6xe)
- build: upgrade to OpenWrt 18.06.2 and refresh patches #357 (ae6xe)
- feature: add volume control to signal tone #353 (dman776)
- feature: add pitch control to signal tone #347 (dman776)
- bugfix: correct issue when pushing sound “on” more than once #345 (dman776)
- bugfix: new settings will now show after a conditional setting (advancedconfig page) #343 (dman776)
- feature: add sounds to realtime signal page #342 (dman776)
- aredn: add definition for hAP ac lite current revision #340 (ae6xe)
- aredn: olsrd: add olsrd watchdog #339 (ae6xe)
- bugfix: aredn: fix bogus nano-m-xw image upload warning #335 (ae6xe)
- bugfix: set execute bit on api script #329 (dman776)
- Update Contributors #328 (raysuelzer)
- Some LUA Code Clean Up, API #327 (raysuelzer)
- aredn: Add definitions for Rocket M2 XW #325 (ae6xe)
- build: set feeds to aredn_packages develop branch #324 (ae6xe)
- bugfix: olsrd: clean up startup warnings #320 (ae6xe)
- bugfix: aredn sysinfo.json fails with mesh rf off #318 (ae6xe)
- bugfix: bogus warning when selecting firmware file to sysupgrade #316 (ae6xe)
- bugfix: helpfile spelling correction #315 (ae6xe)
- aredn: README update for NanoStation XM Ethernet use #314 (ae6xe)
- aredn: Add definitions for Mikrotik RB-911G-5HPnD #313 (ae6xe)
- aredn: hap ac lite add 2G/5G lan ap options #312 (ae6xe)
- bugfix: firstboot button does not function #310 (ae6xe)
- bugfix: remove SNR from signal archive page #309 (dman776)
- bugfix: advanced config usb passthru errors #308 (dman776)
- aredn: Mesh RF enable/disable #307 (ae6xe)
- ar71xx: Add Support for the TP-LINK CPE220 V2.0 Device #306 (apcameron)
- bugfix: aredn: Advanced config settings not persistent though reboot #305 (ae6xe)
- ar71xx: Add Support for the TP-LINK CPE510 V3.0 Device #304 (apcameron)
- aredn: add support for Mikrotik LDF-5nD #302 (ae6xe)
- ar71xx: Add Support for the TP-LINK CPE220 V3.0 Device #300 (apcameron)
- aredn: clarify distance setting in help #299 (ae6xe)
- aredn: Standardize Ethernet Port vlans for UBNT XM devices #297 (ae6xe)
- bugfix: correct uhttpd page security on sysupgrade #296 (dman776)
- ar71xx: Add Support for the TP-LINK CPE610 V1.0 Device #295 (apcameron)
- aredn: harden hAP ac lite 5Ghz Lan Access Point #293 (ae6xe)
- bugfix: usb passthrough not initializing after reboot properly #292 (dman776)
- feature: provide more info on upload disable with tunnels #289 (dman776)
- aredn: hAP ac lite enable 5GHz LAN Access Point #287 (ae6xe)
- aredn: stop cron prior to starting sysupgrade #286 (ae6xe)
- bugfix: POE passthough fails on NS XM devices #285 (ae6xe)
- bugfix: usb_passthrough script missing execute bit (+x) #283 (dman776)
- Revert: uhttpd precompression #282 (ae6xe)
- feature: reduce bandwidth by compressing resource files #278 (dman776)
- build: README updates #277 (ae6xe)
- uhttpd: serve precompressed files #276 (ae6xe)
- aredn: enable nano-m-xw switch to be a dumb switch #275 (ae6xe)
- build: more README updates #274 (ae6xe)
- build: updates to README #273 (ae6xe)
- aredn: Add definition for Mikrotik LHG-5HPnD-XL #272 (ae6xe)
- bugfix: correct initial values for poe and usb passthrough #271 (dman776)
- bugfix: Found another place where uhttpd was tossing a uci error. Fixed #270 (r1de)
- bugfix: AREDN standard port vlan function on Ubiquiti NS XW devices #269 (ae6xe)
- bugfix: README clarifications for litebeam and mikrotik devices #268 (ae6xe)
- bugfix: suppress uhttp uci error on mesh page with no description #267 (dman776)
- aredn: Add definition for Mikrotik LHG5 #266 (ae6xe)
- bugfix: litebeam M5 is single chain device #265 (ae6xe)
- bugfix: correct “Bad Gateway” error on Advanced Config page #263 (dman776)
- build: README corrections #262 (ae6xe)
- aredn: Add LiteBeam M5 definition #261 (ae6xe)
- ar71xx: Enhancement add a profile for the TP-LINK CPE210 V3.0 and CPE510 V2.0 #256 (apcameron)
- feature: add USB passthrough support to advancedconfig page #255 (dman776)
- enhancement: kernel build options, additions to top/busybox, modules #253 (r1de)
- bugfix: correct poe functions in adv cfg #250 (dman776)
- bugfix: fix reboot button #249 (dman776)
- adjust mesh status layout for OLSR stats #248 (dman776)
- modify the advanced config layout #247 (dman776)
- aredn: add definition for Bullet M2 XW #246 (ae6xe)
- feature: allow upload of ssh keys while tunnels since keys #245 (dman776)
- Add PoE passthrough option to advanced config #243 (dman776)
- bugfix: correct improper “wrong firmware” message on Rocket #240 (dman776)
- Add “Advanced config” page #237 (dman776)
- remove aimer script #236 (dman776)
- Typos #234 (kylehamilton)
- bugfix: Check for existing hostnames on the network in DHCP reservations #226 (r1de)
- feature: add a “firstboot” button on setup page #225 (dman776)
- bugfix: check to see if internet is reachable before loading resources #224 (dman776)
- Fixed typos #220 (kylehamilton)
- feature: Provide firmware file advice for uploading firmware files #217 (dman776)
- build: reset version to NoCall #203 (ae6xe)
Full Changelog
Merged pull requests:
- build: prepare back to develop branch from release #202 (ae6xe)
- build: lock in aredn_packages to 3.18.9.0 release #201 (ae6xe)
- aredn: prepare final 3.18.9.0 release #199 (ae6xe)
- aredn: Prepare 3.18.09.0RC1 for release #196 (ae6xe)
- builds: resolve make error on image rename #195 (ae6xe)
- bugfix: aredn: correct test script warnings and errors #194 (ae6xe)
- modify sysinfo.json structure for node,lat,lon values #193 (dman776)
- mtd: spi-nor: Add Winbond w25q128jv support #190 (ae6xe)
- remove ipv6 address labels (ie. none) #189 (dman776)
- aredn: harden cron maintenance scripts #188 (ae6xe)
- aredn: add zombie.log to supporttool list #187 (ae6xe)
- rework sysinfo.json to improve structure #185 (dman776)
- bugfix: show freq on status page instead of channel number for 3GHz #183 (ae6xe)
- aredn: preserve custom firewall rules across sysupgrade #182 (ae6xe)
- aredn: add notation in Mesh Status to identify tunnel info #181 (ae6xe)
- build: README updates #180 (ae6xe)
- bugfix: aredn signal chart correct SNR to dB units #179 (ae6xe)
- bugfix: aredn TxMbps does not show on Mikrotik hAP lite in mesh status #178 (ae6xe)
- aredn: Changed placement of OLSR info on the mesh status page. #177 (r1de)
- bugfix: sysinfo.json not returning chanbw on hapACLite #174 (dman776)
- aredn: phase 1 support for Mikrotik rb952Ui-5ac2nD #172 (ae6xe)
Full Changelog
Merged pull requests:
- aredn: bump to OpenWrt 18.06.1 #164 (ae6xe)
- aredn: node description, lat/lon display, olsr entries #163 (r1de)
- bugfix: use bullet-m image #157 (ae6xe)
- aredn: Node description enhancement #156 (r1de)
- build: refresh openwrt patches #152 (ae6xe)
- aredn: README updates #151 (ae6xe)
- build: add missing ubiquiti loco-m image to the build output #150 (dman776)
- Add testing support for the PowerBridge M5 #147 (txcoder)
- bugfix: aredn slugbug mitigation #146 (ae6xe)
- show the SNR above the real time chart #143 (tpaskett)
- config change to make uhttpd listen on port 80 and 8080 #142 (tpaskett)
- kernel: re-add patch for AT8032 Ethernet PHY #135 (ae6xe)
- bugfix: correct port order on airrouter #128 (dman776)
- update about.html page content #121 (dman776)
- build: fix luasrcdiet-luci Makefile #118 (dman776)
- build: move patch process after feeds update and clean up warning #117 (ae6xe)
- ci: add check2build to workflow section #114 (dman776)
- ci: make the make -jX parameter configurable #113 (dman776)
- ci: add checks to determine if build is required #112 (dman776)
- build: fix to OpenWrt 18.06.0 and README updates #111 (ae6xe)
- aredn: remove duplicate file and minify #109 (r1de)
- aredn: Remove square brackets from description on status page #108 (r1de)
- bugfix: upgrade iperf to iperf3 #105 (dman776)
- bugfix: node description not saving properly #101 (dman776)
- A simple fix for the apostropocalypse #98 (r1de)
- Trim Packages #96 (r1de)
- aredn: README updates #95 (ae6xe)
- ar71xx: Add Support for the TP-LINK CPE210 V3.0 Device #88 (apcameron)
- Format Code #86 (jbrady42)
- bugfix: README correction on cpe510v2 image to use #84 (ae6xe)
- Update contributors file #80 (dman776)
- Add Node description to status (and setup) pages #79 (dman776)
- Added the Nodes locally hosted service listing to sysinfo.json #78 (r1de)
- feature: nodename field on setup page is too small #77 (dman776)
- bugfix: use new nslookup format (fixes #48) #74 (dman776)
- Support more direct hosts #73 (jbrady42)
- bugfix: update wscan to nslookup parsing in openwrt 18.06 #72 (ae6xe)
- bugfix: Ensure ip2hostname returns shortname #71 (ae6xe)
- bugfix: nslookup output parsing changes with openwrt 18.06 #70 (ae6xe)
- aredn: tunnel firewall rules upgrade to openwrt 18.06 #69 (ae6xe)
- circleci: correct proper targets directory structure #63 (dman776)
- build: add vtun package to compile #62 (ae6xe)
- Added Uptime and Load Averages to the sysinfo.json file. #61 (r1de)
- circleci: add proper dependencies to control order of workflow exec #60 (dman776)
- bugfix: signal charts drop-down list (fixes #48) #58 (dman776)
- Ci correct tar #55 (dman776)
- Ci correct tar #54 (dman776)
- circleci: correct tar command #53 (dman776)
- build: Update final image names for CircleCI automation #52 (ae6xe)
- Revert “fix prebuild shellcheck tests to run properly with external s… #51 (ae6xe)
- circleci: add workflow to build/deploy nightly snapshots at 2100UTC #50 (dman776)
- bugfix: correct config.mk package path #43 (dman776)
- feature: add SSID to status page (resolves #31) #42 (dman776)
- bugfix: node cannot detect that it was WAN access #41 (dman776)
- circleci: further refinements in build config #39 (dman776)
- Ci update #38 (dman776)
- Circleci update #37 (dman776)
- Revert “circleci: debug resolve ‘directory not empty error’” #36 (dman776)
- circleci: debug resolve ‘directory not empty error’ #35 (dman776)
- CircleCI initial configuration for automated builds #34 (dman776)
- add Docker build instructions #26 (dman776)
* This Change Log was automatically generated by github_changelog_generator